Zinc based nanostructures are very promising material for pH sensing since they allow the realization of lowcost, sustainable, and high sensitivity electrodes. The pH sensitivity reported in literature for different ZnO nanostructures spreads from sub-to super-Nernstian, with the microscopic mechanism behind the H+ detection often unrevealed. In this work we synthesize by hydrothermal process and thermal annealing two zinc based nanowalls (NWLs) consisting of layered hydroxide zinc nitrate Zn-5(OH)(8)(NO3)(2)center dot 2H(2)O (as grown) and zinc oxide ZnO (annealed) phases, respectively. Scanning electron microscopy, micro Raman spectroscopy, X-ray photoemission spectroscopy were used to characterize the morphology and structure of NWLs. Electrochemical chronopotentiometric analysis in standard buffer solutions (pH 4 to 9) was used to study the response towards pH. Despite the two zinc based NWLs have the same morphology (interconnected sheets 10-20 nm thin, 1.4-1.7 mu m wide), truly different behavior as pH sensitive electrodes are evidenced. As grown NWLs show a super-Nernstian response (+83.7 mV/decade), whereas annealed NWLs show a sub-Nernstian response (+27.1 mV/decade). The data are satisfactorily modeled by considering the crystallographic structures and assuming that layered hydroxide zinc nitrate NWLs is sensitive to only H+ (with two simultaneous and independent mechanisms), while zinc oxide NWLs is simultaneously and independently sensitive to both H+ and OH-. These data and the proposed modeling are useful to further develop the pH sensitivity of electrodes based on ZnO nanostructures.
Microscopic model for pH sensing mechanism in zinc-based nanowalls
Scandurra A.;Bruno E.;Condorelli G. G.;Grimaldi M. G.;Mirabella S.
2019-01-01
Abstract
Zinc based nanostructures are very promising material for pH sensing since they allow the realization of lowcost, sustainable, and high sensitivity electrodes. The pH sensitivity reported in literature for different ZnO nanostructures spreads from sub-to super-Nernstian, with the microscopic mechanism behind the H+ detection often unrevealed. In this work we synthesize by hydrothermal process and thermal annealing two zinc based nanowalls (NWLs) consisting of layered hydroxide zinc nitrate Zn-5(OH)(8)(NO3)(2)center dot 2H(2)O (as grown) and zinc oxide ZnO (annealed) phases, respectively. Scanning electron microscopy, micro Raman spectroscopy, X-ray photoemission spectroscopy were used to characterize the morphology and structure of NWLs. Electrochemical chronopotentiometric analysis in standard buffer solutions (pH 4 to 9) was used to study the response towards pH. Despite the two zinc based NWLs have the same morphology (interconnected sheets 10-20 nm thin, 1.4-1.7 mu m wide), truly different behavior as pH sensitive electrodes are evidenced. As grown NWLs show a super-Nernstian response (+83.7 mV/decade), whereas annealed NWLs show a sub-Nernstian response (+27.1 mV/decade). The data are satisfactorily modeled by considering the crystallographic structures and assuming that layered hydroxide zinc nitrate NWLs is sensitive to only H+ (with two simultaneous and independent mechanisms), while zinc oxide NWLs is simultaneously and independently sensitive to both H+ and OH-. These data and the proposed modeling are useful to further develop the pH sensitivity of electrodes based on ZnO nanostructures.File | Dimensione | Formato | |
---|---|---|---|
Microscopic model for pH.pdf
solo gestori archivio
Tipologia:
Versione Editoriale (PDF)
Dimensione
1.6 MB
Formato
Adobe PDF
|
1.6 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.