The Peloritani Mountain Belt (north-eastern Sicily) represents the connection between the Southern Appenninic Range and the Appenninic Maghrebid Chain. The lithotypes outcropping in a 36 km long and approximately 8 km wide area in the eastern part of the Peloritani Mountains are considered to represent most properly the composition of the lower crust. We selected 7 representative samples of silicate rocks (amphibolite, paragneisses, augen gneiss, phyllitic quartzite, pegmatitic rock) and 3 samples of calcite rocks (calc-schist, marbles) for the petrophysical measurements. Measurements were done on sample cubes of dry rocks in a multi-anvil apparatus. Raising of pressure gives rise to velocity increase, but the rate is different in the silicate and calcite rocks and closely related to progressive closure of microcracks. Linear behaviour is approached above about 200 MPa. Increasing temperature at 600 MPa decreases velocities in most silicate and in the calcite rocks with almost linear slopes. Substantial anisotropy of P- and S-wave velocities and shear wave splitting is found in both rock types. The residual anisotropy observed above about 200 MPa is attributed to lattice preferred orientations (LPO) of major minerals. 3D velocity calculations for an amphibolite, a paragneiss and a marble sample based on the LPO of hornblende, biotite and calcite, respectively, confirm the experimental findings of a close relationship between velocity anisotropy, shear wave splitting, shear wave polarization, lattice preferred orientation and the structural frame of the rocks (foliation, lineation). In the silicate rocks, the intrinsic (600 MPa) average P-wave velocities and Poisson's (Vp/Vs) ratios exhibit a tendency for a linear increase with densities, whereas the three calcite rocks cluster at markedly higher P-wave velocities and Poisson's (Vp/Vs) ratios, compared to their densities. In the silicate rocks, there is also a linear trend for an inverse relationship between the SiO 2 content, density and the Poisson's (Vp/Vs) ratio, respectively.

The Peloritani Mountain Belt (north-eastern Sicily) represents the connection between the Southern Appenninic Range and the Appenninic Maghrebid Chain. The lithotypes outcropping in a 36 km long and approximately 8 km wide area in the eastern part of the Peloritani Mountains are considered to represent most properly the composition of the lower crust. We selected 7 representative samples of silicate rocks (amphibolite, paragneisses, augen gneiss, phyllitic quartzite, pegmatitic rock) and 3 samples of calcite rocks (calc-schist, marbles) for the petrophysical measurements. Measurements were done on sample cubes of dry rocks in a multianvil apparatus. Raising of pressure gives rise to velocity increase, but the rate is different in the silicate and calcite rocks and closely related to progressive closure of microcracks. Linear behaviour is approached above about 200 MPa. Increasing temperature at 600 MPa decreases velocities in most silicate and in the calcite rocks with almost linear slopes. Substantial anisotropy of P- and S-wave velocities and shear wave splitting is found in both rock types. The residual anisotropy observed above about 200 MPa is attributed to lattice preferred orientations (LPO) of major minerals. 3D velocity calculations for an amphibolite, a paragneiss and a marble sample based on the LPO of hornblende, biotite and calcite, respectively, confirm the experimental findings of a close relationship between velocity anisotropy, shear wave splitting, shear wave polarization, lattice preferred orientation and the structural frame of the rocks (foliation, lineation). In the silicate rocks, the intrinsic (600 MPa) average P-wave velocities and Poisson’s (Vp/ Vs) ratios exhibit a tendency for a linear increase with densities, whereas the three calcite rocks cluster at markedly higher P-wave velocities and Poisson’s (Vp/ Vs) ratios, compared to their densities. In the silicate rocks, there is also a linear trend for an inverse relationship between the SiO2 content, density and the Poisson’s (Vp/ Vs) ratio, respectively.

P- and S-wave velocities and densities in silicate and calcite rocks from the Peloritani Mountains, Sicily (Italy): the effect of pressure, temperature and the direction of wave propagation

PUNTURO, Rosalda;CIRRINCIONE, ROSOLINO;MAZZOLENI, Paolo;PEZZINO, Antonino
2005-01-01

Abstract

The Peloritani Mountain Belt (north-eastern Sicily) represents the connection between the Southern Appenninic Range and the Appenninic Maghrebid Chain. The lithotypes outcropping in a 36 km long and approximately 8 km wide area in the eastern part of the Peloritani Mountains are considered to represent most properly the composition of the lower crust. We selected 7 representative samples of silicate rocks (amphibolite, paragneisses, augen gneiss, phyllitic quartzite, pegmatitic rock) and 3 samples of calcite rocks (calc-schist, marbles) for the petrophysical measurements. Measurements were done on sample cubes of dry rocks in a multi-anvil apparatus. Raising of pressure gives rise to velocity increase, but the rate is different in the silicate and calcite rocks and closely related to progressive closure of microcracks. Linear behaviour is approached above about 200 MPa. Increasing temperature at 600 MPa decreases velocities in most silicate and in the calcite rocks with almost linear slopes. Substantial anisotropy of P- and S-wave velocities and shear wave splitting is found in both rock types. The residual anisotropy observed above about 200 MPa is attributed to lattice preferred orientations (LPO) of major minerals. 3D velocity calculations for an amphibolite, a paragneiss and a marble sample based on the LPO of hornblende, biotite and calcite, respectively, confirm the experimental findings of a close relationship between velocity anisotropy, shear wave splitting, shear wave polarization, lattice preferred orientation and the structural frame of the rocks (foliation, lineation). In the silicate rocks, the intrinsic (600 MPa) average P-wave velocities and Poisson's (Vp/Vs) ratios exhibit a tendency for a linear increase with densities, whereas the three calcite rocks cluster at markedly higher P-wave velocities and Poisson's (Vp/Vs) ratios, compared to their densities. In the silicate rocks, there is also a linear trend for an inverse relationship between the SiO 2 content, density and the Poisson's (Vp/Vs) ratio, respectively.
2005
The Peloritani Mountain Belt (north-eastern Sicily) represents the connection between the Southern Appenninic Range and the Appenninic Maghrebid Chain. The lithotypes outcropping in a 36 km long and approximately 8 km wide area in the eastern part of the Peloritani Mountains are considered to represent most properly the composition of the lower crust. We selected 7 representative samples of silicate rocks (amphibolite, paragneisses, augen gneiss, phyllitic quartzite, pegmatitic rock) and 3 samples of calcite rocks (calc-schist, marbles) for the petrophysical measurements. Measurements were done on sample cubes of dry rocks in a multianvil apparatus. Raising of pressure gives rise to velocity increase, but the rate is different in the silicate and calcite rocks and closely related to progressive closure of microcracks. Linear behaviour is approached above about 200 MPa. Increasing temperature at 600 MPa decreases velocities in most silicate and in the calcite rocks with almost linear slopes. Substantial anisotropy of P- and S-wave velocities and shear wave splitting is found in both rock types. The residual anisotropy observed above about 200 MPa is attributed to lattice preferred orientations (LPO) of major minerals. 3D velocity calculations for an amphibolite, a paragneiss and a marble sample based on the LPO of hornblende, biotite and calcite, respectively, confirm the experimental findings of a close relationship between velocity anisotropy, shear wave splitting, shear wave polarization, lattice preferred orientation and the structural frame of the rocks (foliation, lineation). In the silicate rocks, the intrinsic (600 MPa) average P-wave velocities and Poisson’s (Vp/ Vs) ratios exhibit a tendency for a linear increase with densities, whereas the three calcite rocks cluster at markedly higher P-wave velocities and Poisson’s (Vp/ Vs) ratios, compared to their densities. In the silicate rocks, there is also a linear trend for an inverse relationship between the SiO2 content, density and the Poisson’s (Vp/ Vs) ratio, respectively.
Petrophysics; Peloritani Muntains
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11769/7316
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 58
  • ???jsp.display-item.citation.isi??? 49
social impact