In the last decade the epigraphists have grown a new interest in signacula, a class of artifacts for a long time neglected. This has brought numerous contributions devoted to the different regional contexts, along with reflections on methodological questions, not to mention the momentum towards the digitizing of a corpus which counts at least 3,500 pieces, confirming the great potential of these artifacts in providing information related not only to the economy and to the administration of the “res”, both in public and private sphere, but also about the profile of the signacula holders. In this scenario, a specific research question has been inspired by the Sicilian seals - about 60 signacula and a dozen impressions left by seals on mortar in burial contexts: it is possible to identify unequivocally a signaculum through its impression? Given for granted that the use of 3D documentation will bring along effective results in terms of improved readability of signacula and seals, the aim of this contribute is to establish a protocol for a semi-automatic matching between 3D models of seals and 3D models of impressions. As part of a preliminary scanning campaign of Late Roman impressions on mortars and metal seals from the catacombs of Syracuse, two bronze metal seals were digitized with a NextEngine 3D triangulation laser scanner and subsequently 3D printed with liquid resin with a Formlabs Form 2 SLA high resolution printer. The casts obtained, were experimentally used to create a set of impressions on mortar using different degrees and angles of pressure, in order to create similar but still different stamps. During the next step, the impressions were 3D scanned and used as ground truth for the outlined semi-automatic procedure of matching with the seals. In MeshLab environment, the 3d models of seals and impressions were manually aligned and then the distance between two sets of 3D points was measured using the filter Hausdorff distance in order to validate a matching. This successful exercise could open the way to the proposal of creating a virtual edition of signacula with 3D models metadata. Furthermore, a research agenda may include the design of a machine learning algorithm for matching of 3D meshes.

A digital approach for the study of roman signacula from syracuse, sicily

Tanasi D.;Milotta F. L. M.;Stanco F.;
2020-01-01

Abstract

In the last decade the epigraphists have grown a new interest in signacula, a class of artifacts for a long time neglected. This has brought numerous contributions devoted to the different regional contexts, along with reflections on methodological questions, not to mention the momentum towards the digitizing of a corpus which counts at least 3,500 pieces, confirming the great potential of these artifacts in providing information related not only to the economy and to the administration of the “res”, both in public and private sphere, but also about the profile of the signacula holders. In this scenario, a specific research question has been inspired by the Sicilian seals - about 60 signacula and a dozen impressions left by seals on mortar in burial contexts: it is possible to identify unequivocally a signaculum through its impression? Given for granted that the use of 3D documentation will bring along effective results in terms of improved readability of signacula and seals, the aim of this contribute is to establish a protocol for a semi-automatic matching between 3D models of seals and 3D models of impressions. As part of a preliminary scanning campaign of Late Roman impressions on mortars and metal seals from the catacombs of Syracuse, two bronze metal seals were digitized with a NextEngine 3D triangulation laser scanner and subsequently 3D printed with liquid resin with a Formlabs Form 2 SLA high resolution printer. The casts obtained, were experimentally used to create a set of impressions on mortar using different degrees and angles of pressure, in order to create similar but still different stamps. During the next step, the impressions were 3D scanned and used as ground truth for the outlined semi-automatic procedure of matching with the seals. In MeshLab environment, the 3d models of seals and impressions were manually aligned and then the distance between two sets of 3D points was measured using the filter Hausdorff distance in order to validate a matching. This successful exercise could open the way to the proposal of creating a virtual edition of signacula with 3D models metadata. Furthermore, a research agenda may include the design of a machine learning algorithm for matching of 3D meshes.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11769/546156
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? ND
social impact