Nome |
# |
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends, file dfe4d228-a028-bb0a-e053-d805fe0a78d9
|
148
|
Fused Deposition Modeling Parameter Optimization for Cost-Effective Metal Part Printing, file 874d0188-063f-4253-88f6-74b87ad001a6
|
139
|
Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement, file dfe4d22e-c99a-bb0a-e053-d805fe0a78d9
|
95
|
Antibacterial and Chemical Characterization of Silica-Quercetin-PEG Hybrid Materials Synthesized by Sol–Gel Route, file dfe4d22e-9586-bb0a-e053-d805fe0a78d9
|
50
|
Influence of the processing conditions on the mechanical performance of sustainable bio-based PLA compounds, file dfe4d22e-4c09-bb0a-e053-d805fe0a78d9
|
37
|
PES/POSS Soluble Veils as Advanced Modifiers for Multifunctional Fiber Reinforced Composites, file dfe4d227-e7de-bb0a-e053-d805fe0a78d9
|
26
|
Epoxy Based Blends for Additive Manufacturing by Liquid Crystal Display (LCD) Printing: The Effect of Blending and Dual Curing on Daylight Curable Resins, file dfe4d22c-c6af-bb0a-e053-d805fe0a78d9
|
26
|
Textile Production, file 12f52788-66f4-4364-ab15-9186fcbad47f
|
23
|
Combined Approach to Remove and Fast Detect Heavy Metals in Water Based on PES-TiO2Electrospun Mats and Porphyrin Chemosensors, file dfe4d22d-97f4-bb0a-e053-d805fe0a78d9
|
23
|
Production of PLA-Milled Carbon Fibers (MCF) filled filaments for Fused Filament Fabrication (FFF) printing, file bb3c928e-e064-41e2-a957-f0be7af27be2
|
19
|
Physiologically based microenvironment for in vitro neural differentiation of adipose-derived stem cells, file dfe4d228-f669-bb0a-e053-d805fe0a78d9
|
17
|
Interlaminar toughening of epoxy carbon fiber reinforced laminates: Soluble versus non-soluble veil, file dfe4d229-ec45-bb0a-e053-d805fe0a78d9
|
17
|
Thermal Degradation Processes of Aromatic Poly(Ether Sulfone) Random Copolymers Bearing Pendant Carboxyl Groups, file dfe4d22d-6862-bb0a-e053-d805fe0a78d9
|
17
|
Trifunctional epoxy resin composites modified by soluble electrospun veils: Effect on the viscoelastic and morphological properties, file dfe4d22d-b277-bb0a-e053-d805fe0a78d9
|
16
|
Innovative Chemical Process for Recycling Thermosets Cured with Recyclamines® by Converting Bio-Epoxy Composites in Reusable Thermoplastic—An LCA Study, file dfe4d228-b4e3-bb0a-e053-d805fe0a78d9
|
14
|
Polystyrene Nanocomposites Reinforced with Novel Dumbbell-Shaped Phenyl-POSSs: Synthesis and Thermal Characterization, file dfe4d229-d173-bb0a-e053-d805fe0a78d9
|
14
|
Design, Preparation and Thermal Characterization of Polystyrene Composites Reinforced with Novel Three-Cages POSS Molecules, file dfe4d22c-8ce8-bb0a-e053-d805fe0a78d9
|
14
|
Green Composites Based on Blends of Polypropylene with Liquid Wood Reinforced with Hemp Fibers: Thermomechanical Properties and the Effect of Recycling Cycles, file dfe4d228-30f9-bb0a-e053-d805fe0a78d9
|
13
|
Optimization of ZnO Nanorods Growth on Polyetheresulfone Electrospun Mats to Promote Antibacterial Properties, file dfe4d22b-3a5b-bb0a-e053-d805fe0a78d9
|
12
|
Novel cellulose fiber/poly(vinyl)alcohol composites: a thermal study, file dfe4d22d-ab84-bb0a-e053-d805fe0a78d9
|
11
|
Characterization of 3D printed highly filled composite: Structure, thermal diffusivity and dynamic-mechanical analysis, file dfe4d22e-822d-bb0a-e053-d805fe0a78d9
|
11
|
Comparison of Three Additive Manufacturing (AM) Techniques for Manufacturing Complex Hollow Composite Parts, file ad632fe0-45f0-432d-8836-f6a22eb7a364
|
10
|
Eco-sustainability of the textile production: Waste recovery and current recycling in the composites world, file dfe4d22e-341b-bb0a-e053-d805fe0a78d9
|
10
|
Effect of Porosity on the Thermal Conductivity of 3D Printed Parts by Fused Filament Fabrication (FFF), file dfe4d22d-f98d-bb0a-e053-d805fe0a78d9
|
9
|
Synthesis and characterization of copoly(ether sulfone)s with different percentages of diphenolic acid units, file dfe4d22e-2f30-bb0a-e053-d805fe0a78d9
|
9
|
Hybrid metal/polymer filaments for fused filament fabrication (FFF) to print metal parts, file dfe4d22e-ba21-bb0a-e053-d805fe0a78d9
|
9
|
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality, file dfe4d228-fe54-bb0a-e053-d805fe0a78d9
|
8
|
Rotational Rheology of Wood Flour Composites Based on Recycled Polyethylene, file dfe4d22e-822c-bb0a-e053-d805fe0a78d9
|
8
|
Assessment of Recycled PLA-Based Filament for 3D Printing, file dfe4d22e-d7c9-bb0a-e053-d805fe0a78d9
|
7
|
Kinetic Study of the Thermal and Thermo-Oxidative Degradations of Polystyrene Reinforced with Multiple-Cages POSS, file dfe4d22d-cd20-bb0a-e053-d805fe0a78d9
|
6
|
Epoxy Resin Formulation for 3D Printing by Liquid Crystal Display (LCD), file dfe4d22e-42dc-bb0a-e053-d805fe0a78d9
|
6
|
Synthesis and thermal characterization of mono alkyl hepta phenyl POSS / PS nanocomposites, file dfe4d227-b5e3-bb0a-e053-d805fe0a78d9
|
5
|
Study on Epoxy/Thermoplastic Blends Based on the Addition of a Novel Aromatic Block Copolymer, file dfe4d227-3856-bb0a-e053-d805fe0a78d9
|
4
|
Study on epoxy/thermoplastic blends based on the addition of aromatic block copolymers, file dfe4d227-65a8-bb0a-e053-d805fe0a78d9
|
4
|
Methods for the Characterization of Polyetherimide Based Materials Processed by Fused Deposition Modelling, file dfe4d22b-5aba-bb0a-e053-d805fe0a78d9
|
4
|
Projection micro-stereolithography versus master–slave approach to manufacture a micro-optofluidic device for slug flow detection, file 8473837d-1a4d-428e-b58b-2d26ea801c2a
|
3
|
Thermal and rheological behaviours of some random aromatic amino-ended polyethersulfone/polyetherethersulfone copolymers, file dfe4d226-fb43-bb0a-e053-d805fe0a78d9
|
3
|
Synthesis and thermal characterization of mono alkyl hepta phenyl POSS / PS nanocomposites, file dfe4d227-2346-bb0a-e053-d805fe0a78d9
|
3
|
Recycling Waste from Film Packaging to 3D Printing Applications: a Prospective Study to Identify the Processing Temperature, file 1f0442c9-453d-4b5e-a4df-95f09ad66f81
|
2
|
Kinetic Study of the Thermal Dehydration of SiO2 and SiO2-ZrO2 composites prepared by Sol-Gel route, file 7318e268-fa2b-498d-9cfa-aaa4049102c7
|
2
|
“Antibacterial activity of ZnO nanorods on electrospun polyethersulfone fibers”, file abac41e2-bc3e-4a7d-af08-b59205339ef1
|
2
|
Design and manufacturing of a surface plasmon resonance sensor based on inkjet 3D printing for simultaneous measurements of refractive index and temperature, file afe79926-49d1-4d22-a00b-3e4c9760629f
|
2
|
Reactive microspheres as active fillers for epoxy resins, file dfe4d226-f7d7-bb0a-e053-d805fe0a78d9
|
2
|
Combined MALDI-TOF MS and NMR characterizations of Copoly(arylen ether sulphone)s, file dfe4d226-fa3f-bb0a-e053-d805fe0a78d9
|
2
|
The influence of chain rigidity on the thermal properties of some novel random copolyethersulfones, file dfe4d227-028e-bb0a-e053-d805fe0a78d9
|
2
|
Amino terminated copoly(ethersulphone)s bearing biphenylenic units
in the backbone: Synthesis and characterization, file dfe4d227-028f-bb0a-e053-d805fe0a78d9
|
2
|
Thermal and rheological behaviour of some random aromatic polyethersulfone/polyetherethersulfone copolymers, file dfe4d227-105c-bb0a-e053-d805fe0a78d9
|
2
|
Photoactivity of hierarchically nanostructured ZnO-PES fibre mats for water treatments, file dfe4d227-1792-bb0a-e053-d805fe0a78d9
|
2
|
Polylactide/lignin blends
Effects of processing conditions on structure and thermo-mechanical properties, file dfe4d227-4538-bb0a-e053-d805fe0a78d9
|
2
|
Hybrid composites manufactured by resin infusion with a fully
recyclable bioepoxy resin, file dfe4d229-0df0-bb0a-e053-d805fe0a78d9
|
2
|
Thermomechanical properties and morphology of blends of a novel thermoplastic co-polymer and epoxy resin, file dfe4d22a-ccdf-bb0a-e053-d805fe0a78d9
|
2
|
Projection Micro-Stereolithography to Manufacture a Biocompatible Micro-Optofluidic Device for Cell Concentration Monitoring, file 03ab2999-a9ee-4fa4-b8bf-eeafe21d1554
|
1
|
Controlling Process Variables in 3D Printing to Limit the Energy Consumption, file 06b5b671-6791-49da-9868-aed093f7abf0
|
1
|
Thermo-mechanical analysis of fully-recyclable bio-based epoxy latent systems for green composites manufacturing and their recycling, file 09aa31ec-d989-4e91-8a50-d0c6158d556a
|
1
|
Aging effects on the viscoelastic behaviour of products by fused deposition modelling (FDM) made from recycled and wood-filled polymer resins, file 438d690e-8ed2-4c68-966c-ea0ab11c2cb1
|
1
|
Changes in Chemical and Physical Properties of Bio-based Thermoplastics During Fused Deposition Modelling (FDM) Process, file 4d78e861-65ff-42a5-a459-573e18ddddf6
|
1
|
Predicting the Printability of Poly(Lactide) Acid Filaments in Fused Deposition Modeling (FDM) Technology: Rheological Measurements and Experimental Evidence, file 4eaad67d-490a-471d-9cb3-9ef2404833fb
|
1
|
Chemical Recycling of Fully Recyclable Bio-Epoxy Matrices and Reuse Strategies: A Cradle-to-Cradle Approach, file 51b9d06c-a4b7-4e7f-832a-3cceea62c0f7
|
1
|
Chemical Recycling of Fully-recyclable Bio-Epoxy Matrices and Re-use strategies: a Cradle-to-Cradle approach, file 9d1a0131-5e8c-4334-aeea-c0b99260dccc
|
1
|
Thermomechanical properties of bio-based epoxy resin and daylight curable blends for 3d printing by Liquid Crystal Display (LCD), file acb67911-fcf8-446a-9599-46ea1d7e9ec7
|
1
|
Thermo-mechanical characterization of Metakaolin(MK)-based geopolymers filled with Etna volcanic fly ash, file b903acd3-308e-459c-a701-0902a0bebf8d
|
1
|
Development of a toughened DGEBS/DDS system toward improved thermal and mechanical properties by the addition of a tetrafunctional epoxy resin and a novel thermoplastic, file dfe4d226-f4d7-bb0a-e053-d805fe0a78d9
|
1
|
Development of epoxy/hyperbranched blends for resin transfer molding and vacuum assisted resin transfer molding applications: Effect of a reactive diluent, file dfe4d226-f845-bb0a-e053-d805fe0a78d9
|
1
|
Synthesis and thermal characterization of some novel ABA block copolymers, file dfe4d226-f88c-bb0a-e053-d805fe0a78d9
|
1
|
Thermal decomposition products of copoly(arylene ether sulhone)s characterized by Direct Pyrolysis Mass Spectrometry, file dfe4d226-f931-bb0a-e053-d805fe0a78d9
|
1
|
Comparison of the effect of epoxy microspheres on the thermomechanical and rheological properties of an epoxy resin, file dfe4d226-fa3d-bb0a-e053-d805fe0a78d9
|
1
|
Thermomechanical properties of epoxy/poly(ε-caprolactone) blends, file dfe4d226-fa3e-bb0a-e053-d805fe0a78d9
|
1
|
Polimeri a comportamento Auxetico: un innovazione o un evoluzione naturale?, file dfe4d226-fab5-bb0a-e053-d805fe0a78d9
|
1
|
I materiali Auxetici: Innovazione o evoluzione naturale, file dfe4d226-fb46-bb0a-e053-d805fe0a78d9
|
1
|
Influence of copolymer’s end group and molecular weight on the rheological and thermomechanical properties of epoxy/thermoplastic blends, file dfe4d226-fb9c-bb0a-e053-d805fe0a78d9
|
1
|
Adjustable and negative thermal expansion from multilayered systems, file dfe4d226-fba5-bb0a-e053-d805fe0a78d9
|
1
|
Influence of hydroxy-functionalised hyperbranched polymers on the thermomechanical and morphological properties of epoxy resins, file dfe4d227-082e-bb0a-e053-d805fe0a78d9
|
1
|
I materiali compositi auxetici: proprietà ed applicazioni, file dfe4d227-0ebf-bb0a-e053-d805fe0a78d9
|
1
|
Thermomechanical and morphological properties of epoxy blends with hyperbranched polyester: Effect of the pseudo-generation number, file dfe4d227-10d8-bb0a-e053-d805fe0a78d9
|
1
|
Properties and performances of various hybrid glass/natural fibre composites for curved pipes, file dfe4d227-14d7-bb0a-e053-d805fe0a78d9
|
1
|
Hexagonal Honeycombs with Zero Poisson's Ratios and Enhanced Stiffness, file dfe4d227-1665-bb0a-e053-d805fe0a78d9
|
1
|
Influence of the selected hardener on the phase separation in epoxy/thermoplastic polymer blends, file dfe4d227-1a6a-bb0a-e053-d805fe0a78d9
|
1
|
Improvement of Thermomechanical Properties of a DGEBS/DDS System Blended with a Novel Thermoplastic Copolymer by Realisation of a Semi-IPN Network, file dfe4d227-1ffa-bb0a-e053-d805fe0a78d9
|
1
|
Thermal Characterization of a Series of Lignin-based Polypropylene Blends, file dfe4d227-335a-bb0a-e053-d805fe0a78d9
|
1
|
Development of an epoxy system characterised by low water absorption and high Thermomechanical performances, file dfe4d227-3844-bb0a-e053-d805fe0a78d9
|
1
|
Thermomechanical and morphological properties of epoxy resins modified with functionalized hyperbranched polyester, file dfe4d227-3944-bb0a-e053-d805fe0a78d9
|
1
|
The influence of chain ends on the thermal and rheological properties of some 40/60 PES/PEES copolymers, file dfe4d227-3b2d-bb0a-e053-d805fe0a78d9
|
1
|
Studies on epoxy blends modified with a hyperbranched polyester, file dfe4d227-3da5-bb0a-e053-d805fe0a78d9
|
1
|
Synthesis and characterization of sulfonated copolyethersulfones, file dfe4d227-3f9d-bb0a-e053-d805fe0a78d9
|
1
|
Hexachiral truss-core with twisted hemp yarns: out-of-plane shear properties, file dfe4d227-425f-bb0a-e053-d805fe0a78d9
|
1
|
Thermoset/Thermoplastic blends: The effect of block copolymers, file dfe4d227-4df7-bb0a-e053-d805fe0a78d9
|
1
|
Thermo-mechanical characterization of a monochlorophenyl, hepta isobutyl polyhedral oligomeric silsesquioxane/polystyrene composite, file dfe4d227-4f48-bb0a-e053-d805fe0a78d9
|
1
|
Device and method for the production of cellular materials, file dfe4d227-68ff-bb0a-e053-d805fe0a78d9
|
1
|
Low temperature sputtered TiO2 nano sheaths on electrospun PES fibers as high porosity photoactive material, file dfe4d227-79f9-bb0a-e053-d805fe0a78d9
|
1
|
Thermal and viscoelastic properties of epoxy blends modified with nano modifier for RTM applications, file dfe4d227-a000-bb0a-e053-d805fe0a78d9
|
1
|
Environmental impacts and thermal insulation performance of innovative composite solutions for building applications, file dfe4d227-a40f-bb0a-e053-d805fe0a78d9
|
1
|
LCA of a novel hybrid glass-hemp/thermoset composite, file dfe4d229-0d77-bb0a-e053-d805fe0a78d9
|
1
|
Influence of soluble electrospun co-polyethersulfone veils on mechanical and morphological properties of epoxy composites: effect of polymer molar mass., file dfe4d229-1489-bb0a-e053-d805fe0a78d9
|
1
|
Role of the surface composition of the polyethersulfone–TiiP–H 2 T 4 fibers on lead removal: from electrostatic to coordinative binding, file dfe4d229-add6-bb0a-e053-d805fe0a78d9
|
1
|
Effect of electrospun nanofibres and MWCNTs on the low velocity impact response of carbon fibre laminates, file dfe4d229-ec42-bb0a-e053-d805fe0a78d9
|
1
|
Hybrid biobased recyclable epoxy composites for mass production, file dfe4d229-ec47-bb0a-e053-d805fe0a78d9
|
1
|
Effects of mixing di- and tri-functional epoxy monomers on epoxy/thermoplastic blends, file dfe4d229-ed2e-bb0a-e053-d805fe0a78d9
|
1
|
Functional electrospun membranes, file dfe4d22a-8ea2-bb0a-e053-d805fe0a78d9
|
1
|
Additive Manufacturing of Plastics: An Efficient Approach
for Composite Tooling, file dfe4d22e-2456-bb0a-e053-d805fe0a78d9
|
1
|
Additive Manufacturing Processing of Plastics for Mass Production of Composites Tooling: Technical and Economic Analysis, file dfe4d22e-a6d1-bb0a-e053-d805fe0a78d9
|
1
|
Totale |
925 |