MAURO, STEFANO
MAURO, STEFANO
INGEGNERIA CIVILE E ARCHITETTURA (DICAR)
2D CFD Modeling of H-Darrieus Wind Turbines using a Transition Turbulence Model
file da validare2014-01-01 Lanzafame, Rosario; Mauro, Stefano; Messina, Michele
A Detailed Analysis of the Centrifugal Pumping Phenomenon in HAWTs Through the Use of CFD Models
2019-01-01 Mauro, Stefano; Lanzafame, Rosario; Messina, Michele; Brusca, Sebastian
A Feasibility Analysis of an Electric KERS for Internal Combustion Engine Vehicles
2019-01-01 Pipitone, E.; Vitale, G.; Lanzafame, R.; Brusca, S.; Mauro, S.; Beccari, S.
An insight into the rotational augmentation on HAWTs by means of CFD simulations - Part I: State of the art and numerical results
2017-01-01 Mauro, S.; Lanzafame, R.; Messina, M.
An insight into the rotational augmentation on HAWTs by means of CFD simulations - Part II: Post-processing and force analysis
2017-01-01 Mauro, S.; Lanzafame, R.; Messina, M.
Back-forward model analysis for spatial localization of pollutant sources
2017-01-01 Brusca, Sebastian; Famoso, Fabio; Lanzafame, Rosario; Mauro, Stefano; Messina, Michele
Bell-Metha Power Augmented Savonius turbine as Take-off in OWC Systems
file da validare2023-01-01 Brusca, Sebastian; Galvagno, Antonio; Mauro, Stefano; Messina, Michele; Lanzafame, Rosario
CFD modeling of a ducted Savonius wind turbine for the evaluation of the blockage effects on rotor performance
2019-01-01 Mauro, S.; Brusca, S.; Lanzafame, R.; Messina, M.
Criteri di progettazione di turbine eoliche attraverso codici fluidodinamici 3D
file da validare2011-01-01 Lanzafame, Rosario; Mauro, S; Messina, Michele
Development and validation of CFD 2D models for the simulation of micro H-darrieus turbines subjected to high boundary layer instabilities †
file da validare2020-01-01 Lanzafame, R.; Mauro, S.; Messina, M.; Brusca, S.
Development of a Computational Fluid Dynamics Model to Evaluate the Thermal Resistance of a SiC Power Module under Several Operating Condition
2024-01-01 Donetti, L.; Sitta, A.; Mauromicale, G.; Calabretta, M.; Mauro, S.; Sequenzia, G.
Directly Cooled Silicon Carbide Power Module: Pin-Fins Roughness Effect on Pressure Drop
2024-01-01 Donetti, L.; Sitta, A.; Calabretta, M.; Torrisi, M.; Mauro, S.; Sequenzia, G.
Ducted Savonius Turbine Performance: A Multi-Application Approach
file da validare2020-01-01 Brusca, S.; Famoso, F.; Galvagno, A.; Lanzafame, R.; Mauro, S.; Messina, M.; Prestipino, M.
Effects of the pin-fins cooler roughness on the thermo-fluid dynamics performance of a SiC power module
2024-01-01 Donetti, L.; Mauro, S.; Sequenzia, G.; Calabretta, M.; Sitta, A.
Evaluation of the radial flow effects on micro HAWTs through the use of a transition CFD 3D model - Part I: State of the art and Numerical model review
2015-01-01 Lanzafame, Rosario; Mauro, S; Messina, Michele
Evaluation of the radial flow effects on micro HAWTs through the use of a transition CFD 3D model - Part II: Post-processing and comparison of the results
2015-01-01 Lanzafame, Rosario; Mauro, S; Messina, Michele
Fuels with low octane number: water injection as knock control method
2019-01-01 Brusca, S.; Galvagno, A.; Lanzafame, R.; Mauro, S.; Messina, M.
HAWT Design and Performance Evaluation: Improving the BEM Theory Mathematical Models
2015-01-01 Lanzafame, Rosario; Mauro, S; Messina, Michele
Heat Exchange Numerical Modeling of a Submarine Pipeline for Crude Oil Transport
2017-01-01 Lanzafame, Rosario; Mauro, Stefano; Messina, Michele; Brusca, Sebastian
How to extrapolate 3D aerodynamic coefficients from HAWT CFD simulations: An inverse BEM approach
file da validare2022-01-01 Mauro, S.; Lanzafame, R.; Messina, M.; Brusca, S.