Semiconducting and insulating polymers and copolymers/Au nanograins based hybrid multilayers (HyMLs) were fabricated on p-Si single-crystal substrate by an iterative method that involves, respectively, Langmuir-Blodgett and spin-coating techniques (for the deposition of organic film) and sputtering technique (for the deposition of metal nanograins) to prepare Au/HyMLs/p-Si Schottky device. The electrical properties of the Au/HyMLs/p-Si Schottky device were investigated by current-voltage (I–V) measurements in the thickness range of 1-5 bilayers (BL). At different number of layers, current-voltage (I–V) measurements were performed. Results showed a rectifying behavior. Junction parameters, such as barrier height (BH), from the I–V measurements for example for the PMMA-b-PS based Au/HyMLs/p-Si structure were obtained as 0.72±0.02 eV at 1BL and 0.64±0.02eV at 5BL. It was observed that the BH value of 0.61 eV obtained for the 5 BL PS based Au/HyMLs/p-Si structure was lower than the value of 0.68 eV of conventional Au/p-Si Schottky diodes. Thus, modification of the interfacial potential barrier for Au/p-Si diodes has been achieved using a thin MLs of different polymers based HyMls semiconductor, due to a favored transport of majority carriers at polymer/metal interface.
Schottky barrier height tuning by Hybrid organic-inorganic multilayers
RUFFINO, FRANCESCO;GRIMALDI, Maria Grazia;G. Marletta
2014-01-01
Abstract
Semiconducting and insulating polymers and copolymers/Au nanograins based hybrid multilayers (HyMLs) were fabricated on p-Si single-crystal substrate by an iterative method that involves, respectively, Langmuir-Blodgett and spin-coating techniques (for the deposition of organic film) and sputtering technique (for the deposition of metal nanograins) to prepare Au/HyMLs/p-Si Schottky device. The electrical properties of the Au/HyMLs/p-Si Schottky device were investigated by current-voltage (I–V) measurements in the thickness range of 1-5 bilayers (BL). At different number of layers, current-voltage (I–V) measurements were performed. Results showed a rectifying behavior. Junction parameters, such as barrier height (BH), from the I–V measurements for example for the PMMA-b-PS based Au/HyMLs/p-Si structure were obtained as 0.72±0.02 eV at 1BL and 0.64±0.02eV at 5BL. It was observed that the BH value of 0.61 eV obtained for the 5 BL PS based Au/HyMLs/p-Si structure was lower than the value of 0.68 eV of conventional Au/p-Si Schottky diodes. Thus, modification of the interfacial potential barrier for Au/p-Si diodes has been achieved using a thin MLs of different polymers based HyMls semiconductor, due to a favored transport of majority carriers at polymer/metal interface.File | Dimensione | Formato | |
---|---|---|---|
S1946427414003960a2.pdf
solo gestori archivio
Licenza:
Non specificato
Dimensione
119.18 kB
Formato
Adobe PDF
|
119.18 kB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.