A new uniaxial material model for the simulation of lateral buckling of steel rebars

Lateral buckling of longitudinal rebars is a crucial phenomenon in the response of reinforced concrete structures since it often anticipates crushing of the core concrete and triggers failure of the member. Owing to this, lateral buckling has been simulated in some uniaxial steel models available in the literature. However, most of these models concentrate their novelties on the compression backbone curve of rebars characterised by low-to-medium slenderness ratios and inaccurately simulate the response of bars characterised by high slenderness ratio or the transition from the compression backbone curve to tension. Moreover, all these models neglect the effects of the concrete cover on the lateral buckling of the rebar. This paper presents a new uniaxial material model of reinforcing steel bars with the aim of achieving a more accurate evaluation of the response of rebars including the effects of lateral buckling. The proposed model is calibrated on the results of numerical analyses conducted on refined models of steel rebars characterised by low-to-high slenderness ratios. The proposed model incorporates the possibility to simulate the behaviour of bare and embedded rebars. The response is path-dependent and described by means of smooth curves so as to guarantee numerical stability in nonlinear finite element simulations. The accuracy of the model has been validated by comparison with the response of laboratory tests performed by other researchers on steel rebars. Finally, applications are shown on six reinforced concrete columns in order to highlight the effects of the simulation of buckling of the steel rebars on the global and local responses.