Droplet size is a key factor in minimizing spray drift. Different types of adjuvants and sprayer operating pressures can affect the droplet size distribution in various ways. This study aimed to evaluate the effects of commercial adjuvants, namely, acids and surfactant (AS), silicone surfactant (SS), organosilicone surfactant (OS), mineral oil (MO and MO2), and copolymer (CP) adjuvants, on the droplet spectra and physicochemical properties of aqueous solutions. Hydrogen potential (pH), volumetric mass ((Formula presented.)), electrical conductivity (EC), surface tension (ST), contact angle (CA), and droplet spectra were measured. The droplet spectrum variables, including volumetric diameters ((Formula presented.), (Formula presented.), and (Formula presented.)), the Relative Span Factor ((Formula presented.)), and percentages of the total volume of droplets with a diameter smaller than 100 µm (V100) and larger than 500 µm (V500), were determined using a laser diffraction particle analyzer (Malvern Spraytec). Spraying tests were carried out using the AXI 11003 flat fan nozzle at pressures of (0.1, 0.2, 0.3, 0.4, and 0.5) MPa. The increase in pressure increased the V100 and the (Formula presented.), with greater sensitivity observed for SS. Adjuvants such as AS, MO2 and OS showed a more balanced trend, with a smaller increase in fine droplets and a greater reduction in coarse droplets. The principal component analysis (PCA) revealed that the droplet spectrum variables were the ones that best explained the variation among the solutions. A negative correlation was identified between EC and other physicochemical properties, such as pH, ST, and CA. Therefore, these properties alone did not determine the atomization pattern. The study demonstrates that optimizing spray quality and minimizing drift require a combined consideration of adjuvant physicochemical properties and their interaction with operational pressure.

Dynamics of Droplet Spectra and Physicochemical Properties Under Different Adjuvants and Spraying Pressures

Salvatore Privitera
;
Sebastian Lupica;Antonio Trusso Sfrazzetto;Emanuele Cerruto
Penultimo
;
Giuseppe Manetto
Ultimo
2026-01-01

Abstract

Droplet size is a key factor in minimizing spray drift. Different types of adjuvants and sprayer operating pressures can affect the droplet size distribution in various ways. This study aimed to evaluate the effects of commercial adjuvants, namely, acids and surfactant (AS), silicone surfactant (SS), organosilicone surfactant (OS), mineral oil (MO and MO2), and copolymer (CP) adjuvants, on the droplet spectra and physicochemical properties of aqueous solutions. Hydrogen potential (pH), volumetric mass ((Formula presented.)), electrical conductivity (EC), surface tension (ST), contact angle (CA), and droplet spectra were measured. The droplet spectrum variables, including volumetric diameters ((Formula presented.), (Formula presented.), and (Formula presented.)), the Relative Span Factor ((Formula presented.)), and percentages of the total volume of droplets with a diameter smaller than 100 µm (V100) and larger than 500 µm (V500), were determined using a laser diffraction particle analyzer (Malvern Spraytec). Spraying tests were carried out using the AXI 11003 flat fan nozzle at pressures of (0.1, 0.2, 0.3, 0.4, and 0.5) MPa. The increase in pressure increased the V100 and the (Formula presented.), with greater sensitivity observed for SS. Adjuvants such as AS, MO2 and OS showed a more balanced trend, with a smaller increase in fine droplets and a greater reduction in coarse droplets. The principal component analysis (PCA) revealed that the droplet spectrum variables were the ones that best explained the variation among the solutions. A negative correlation was identified between EC and other physicochemical properties, such as pH, ST, and CA. Therefore, these properties alone did not determine the atomization pattern. The study demonstrates that optimizing spray quality and minimizing drift require a combined consideration of adjuvant physicochemical properties and their interaction with operational pressure.
2026
atomization
droplet size
mineral oil
surface tension
surfactants
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.11769/717170
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact