Dumbbell-shaped polyhedral oligomeric silsesquioxanes/polystyrene nanocomposites: The influence of the bridge rigidity on the resistance to thermal degradation

A comparative study concerning the resistance to the thermal degradation of polystyrene-based nanocomposites loaded with five novel aromatic dumbbell-shaped polyhedral oligomeric silsesquioxanes was carried out in dynamic heating conditions. The fillers were formed by two identical silicon cages RSiO(R = isobutyl) linked to several aromatic bridges (Ar, Ar-Ar, Ar-O-Ar, Ar-S-Ar and Ar-SOAr) where Ar = p-C Nanocomposites were prepared by in situ polymerization of styrene in the presence of 5% of appropriate polyhedral oligomeric silsesquioxanes. The actual filler content in the products obtained, which was checked by 1H NMR spectroscopy, resulted in all cases slightly higher than that in starting mixtures. Glass transition temperature (T was determined by differential scanning calorimetry. Thermogravimetric (TG) and differential thermogravimetric (DTG) analysis were carried out in both flowing nitrogen and static air atmosphere, and temperatures at 5% mass loss (T were determined to investigate the resistance to the thermal degradation. The results obtained were compared with each other and discussed. The resistance to the thermal degradation showed modest increments in respect to neat polystyrene, differently from analogous nanocomposites containing as fillers aliphatic bridged polyhedral oligomeric silsesquioxanes, as supported by scanning electron microscopy measurements which evidenced polyhedral oligomeric silsesquioxanes auto-aggregation phenomena. This behaviour was interpreted as due to the rigidity of polyhedral oligomeric silsesquioxane's aromatic bridges, which leads to low miscibility between filler and polymeric matrix.